Small Plan Notes
Drawing A-08

Measuring and Drawing Your Own Floor Plan

Before planning anything in a small home, measure what you already have. An accurate plan of your own flat costs an afternoon and prevents most of the expensive mistakes.

Why measure before anything else

Most small-home decisions fail on dimensions rather than on taste. The sofa is ten centimetres too long for the wall, the fridge door cannot open fully, the new wardrobe covers the light switch. A floor plan is a drawing of a building seen from above, cut through at about waist height, and once you have an accurate one of your own home you can test ideas on paper for the price of an eraser instead of on a delivery day.

What you need

Sketch first, measure second

Walk through the home and draw the rough shape of each room freehand, roughly in proportion but not to scale. Mark every door, window, radiator, socket, switch, waste pipe, meter cupboard and the direction each door swings. This sketch is where the numbers will be written, so give yourself space: a cramped sketch produces measurements you cannot read a week later.

Take running dimensions

Measuring each piece of wall separately and adding them up accumulates error. Instead, hook the tape at one corner, run it along the whole wall in one go, and write down the cumulative reading at each feature as you pass it — the edge of the door frame, the other edge, the start of the window, the end of it, the far corner. Record the overall length last, as a check. If the parts no longer agree with the whole, you know the error is in that wall and not spread invisibly through the drawing.

Diagonals keep you honest

Few rooms are truly rectangular, and older buildings rarely pretend to be. Measure both diagonals of each room corner to corner: if they differ, the room is out of square, and you will know by how much before ordering anything made to fit. Measure the wall thickness at every door and window reveal too, since that is what tells you whether a wall is a thin partition you might move or something more substantial.

Do not forget the third dimension

Height decides what you can store, hang or build in, so record it in several places rather than once. Note the ceiling height in the middle of the room and near the corners, the sill and head height of each window, and every beam, bulkhead, step or sloping ceiling. In a small home those are usually the features that decide where tall storage can go.

Draw it at a sensible scale

Drawings are made at a fixed scale, a stated ratio between the drawing and the real thing. For a whole small flat, a scale where one square of paper stands for ten centimetres of room is comfortable and easy to count — that figure is only an illustration, so pick whatever lets the plan fit on one sheet. Draw the walls first, then the openings, then the fixed items that cannot move: the soil pipe, the boiler, the meter, the window positions.

Then test the furniture on paper

Cut small paper rectangles for the bed, the sofa, the table, the wardrobe and the washing machine at the same scale, and slide them around the plan. Add door swings as quarter circles and mark the space you need in front of drawers and cupboards. Layouts that are impossible become obvious in seconds, and the one good arrangement that nobody had thought of usually appears in the same few minutes.

Keep the drawing alive

Borrow one habit from technical drawing: date every version and keep the old ones. Add what you discover as you live there — which socket is actually behind the sofa, where the stopcock hides, how wide the stair turn really is. A plan that is updated becomes the single most useful document you own about your home, and the thing you hand to any tradesperson on day one.

A measured sketch is not a survey. For structural work, permit submissions or anything built to fit exactly, have the dimensions checked on site by the professional or supplier doing the work.

Rev. 2026-11-21